Choosing PPE starts with the hazards, not the catalogue. Tick everything your workers are exposed to during the job and the selector lists the protection for each hazard, with the standard to ask a supplier for. It works for a single task, a job role or a whole site.
Where PPE fits in hazard control
The OHS Act and the Construction Regulations put PPE last in the hierarchy of controls: first eliminate the hazard, then substitute something less hazardous, then engineer it out (guards, extraction, barriers), then use administrative controls (procedures, training, signs). PPE covers what remains. That is why a risk assessment comes first: it tells you which hazards are left and how severe they are.
Once the list is drawn up, note the standard for each item in your PPE matrix or issue register. A supplier quoting "safety glasses" without the EN 166 impact rating or "boots" without the SANS 20345 class may be quoting something that won't pass your next audit.
Using the list for a PPE matrix
- One row per job role. Run the selector for each role (welder, general worker, forklift driver, cleaner) and record the items as the issue standard for that role.
- Add the sizes and issue rate. The size chart and the budget calculator turn the matrix into quantities and a yearly cost.
- Check the exposure. For noise and airborne contaminants the right protector depends on the measured level; use the noise calculator and the respirator selector.
- Train and inspect. PPE only works if it fits, is worn correctly and is replaced when worn out.
Frequently asked questions
Who decides what PPE a worker needs?
Is the selector a substitute for a risk assessment?
What does S3 mean on safety boots?
Can I send the list to several suppliers?
Related PPE
- SR-02Personal Protective EquipmentHead, eyes, ears, lungs, hands, body, feet
- SR-07PPE KitsMade up to your own item list
- IN-02Construction PPESANS 1397 hard hats
- IN-01Mining PPESANS 1397 hard hats
More PPE tools
- TL-01PPE Budget CalculatorAnnual PPE cost per employee, per month and per new starter
- TL-03Noise Exposure Calculator8-hour noise dose, allowed time and the ear protector SNR you need
- TL-04Respirator Protection Factor CalculatorRequired protection factor, mask class (FFP2, FFP3, full face) and filter colour
- TL-05Fall Clearance CalculatorFree fall, total fall distance and the clearance a lanyard or SRL needs
- TL-06PPE Size Chart and Size-Run BuilderBoot, glove, overall and vest sizes, plus a size run for your quote
- TL-07EN 388 Glove Rating DecoderRead the 4X43F code on a glove: abrasion, cut, tear, puncture, impact
- TL-08PPE Standards and Replacement GuideSANS and EN standards for each item, and when to replace it
